Wonky Cross Block
I’ve provided an 8.5” square and two 4”x13” strips. Please use either the square or the strips (Or use both if you want to make me two blocks.) as one of the fabrics in your block. For the other fabric in the block, please use your own solid or print scraps.
There’s a tutorial if you go to the link below. The pictures on the tutorial are particularly helpful.
Here are my instructions:
- Lay the 8.5” square (either the one I provided or one from your scraps) on your cutting mat and make a wonky vertical cut. Use your ruler because you’ll want it to be a straight cut.
- Separate the two pieces.
- If you want, cut down one of the contrasting strips to any width. I definitely do NOT want them all to be 4” widths. (Note: So, just to clarify, if you used your own fabric for the 8.5” square, use the strips I provided. If you used the 8.5” square I provided, use your own fabric for the strips.)
- Place the strip between the two pieces and sew each piece to one side of the strip.
- Lay the block on your cutting mat and make a wonky horizontal cut using your ruler. You will cut perpendicular to the strip you just sewed.
- Separate the two pieces.
- If you want, cut down the second contrasting strip to any width.
- Place the strip between the two pieces and sew each piece to one side of the strip. This is a little tricky because you have to try to line up the strip that you cut across. But don’t worry about it too much…I definitely do not mind if it’s a little off since that will add even more to the wonkiness.
- Square up the block to 8.5” x 8.5”. (If you don’t want to square it up, that’s fine. I can square it up myself.)
If you have any questions, please email me at llatham0306@gmail.com or call/text me at 785-424-4313.
